> ## Documentation Index
> Fetch the complete documentation index at: https://dub-3ccc829c.mintlify.site/llms.txt
> Use this file to discover all available pages before exploring further.

# Your first set

> Wire the turntables and mixer, load tracks, drop the needle, and read what Dub tells you about the signal.

## Wire it up

**1. Turntables into the interface**

Each turntable goes into its own input pair on the interface. If the
interface has a **PHONO/LINE** switch per input, set it to **PHONO** for
a turntable.

**2. Interface into the mixer**

Each deck's output pair goes into a line input on your mixer. The mixer
does all the mixing.

**3. Open Dub**

With the interface plugged in, Dub opens the two-deck **Performance**
surface. A known interface like the Serato SL 3 is routed for you; any
other is set up once in **Preferences ▸ Audio** (see
[Hardware](https://dub-3ccc829c.mintlify.site/hardware.md#setting-up-your-interface)).

## Load a track

* **Drag** a track from the library onto a deck.
* Or select it in the library and press **Space**: it loads onto the deck
  that isn't the master, so the deck you're playing out of stays untouched.

In Performance, loading never starts playback. The record does that.

## The source switch: INT · TC · THRU

Each deck has a three-way switch in its header. You choose the mode; Dub
never switches it for you.

| Mode | What drives the deck |
| - | - |
| **INT** | The track plays on Dub's own clock, like a CD player. Press it to start. |
| **TC** | The control vinyl drives the track: scratching, needle drops and rewinds. |
| **THRU** | A real record on the platter passes straight through Dub, with a live waveform, a live tempo and the effects on it. |

## Calibration

You don't need to calibrate by hand. The first time a deck hears a turning
control record in a session, it measures the needle by itself: the deck says
**CALIBRATING** while it does, then **Calibrated**. Keep the record playing at
normal speed for a moment.

The **↻** button next to the switch recalibrates on demand, after a needle
change or a new control record. It works on **TC** and on **INT**, so you can
recalibrate while the set plays on (see
[Saving a set on stage](https://dub-3ccc829c.mintlify.site/troubleshooting.md#saving-a-set-on-stage)).

## The signal panel

Each deck has a **SIGNAL** tab at its outer edge. It opens one word for the
state of that deck's timecode and one line on what to check:

| Word | Meaning | What to check |
| - | - | - |
| **LOCKED** | Dub is reading the timecode, forward, reverse or stopped. | Nothing. |
| **WEAK** | One channel is low, or the signal is noisy. | The cable and the needle; the panel names the low channel. |
| **NO LOCK** | Timecode is there but not readable right now. | Usually you're scratching or the record is stopped. |
| **NO SIGNAL** | Nothing arriving. | Needle down, record turning? The PHONO/LINE switch. |
| **NO INPUT** | The deck has no input pair. | Pick one in **Preferences ▸ Audio**. |

The panel also meters each input channel in dB and draws the timecode's
shape: a clean signal is a round circle, a weak channel squashes it.

## The output meters

Between the decks, under the phase meter, two slim meters show what each
deck is actually sending to the mixer. When a meter is empty for a reason,
it says so:

* **ECHO OUT**: echo out is still on and its tail has died away. The record
  plays on underneath, but nothing leaves the deck. Turn echo out off.
* **NO OUTPUT**: the deck has no output pair, or the audio engine isn't
  running.


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.