What you need
Dub sits between your turntables and your mixer. For the two-deck Performance surface you need:- An audio interface with at least 4 inputs and 4 outputs: one stereo pair in and one out per deck.
- Control vinyl on each turntable.
- An external mixer with line inputs. Dub has no software mixer; each deck leaves on its own output pair and you mix on your hardware.
Tested hardware
Other class-compliant interfaces with 4 inputs and 4 outputs should work.
Dub needs to know which channels each deck uses, which is the next section.
Setting up your interface
Open Preferences ▸ Audio while Dub is running with the interface plugged in. It shows the interface and, for each deck, the pair the needle comes in on and the pair that goes to the mixer. The badge on the interface says how Dub knows it:
The first time you plug in an interface Dub doesn’t know, it says so once
and points you to this tab.
Routing an unknown interface
1
Choose one deck or two
TWO DECKS needs 4 inputs and 4 outputs. ONE DECK works on any
interface.
2
Find each deck's input
Channel numbers are the ones printed on the back of the interface. Drop
the needle on control vinyl and watch the meter next to each input: it
reads timecode, music, not timecode, or nothing, so the right
pair finds itself.
3
Find each deck's output
Press TEST next to a deck’s output: it plays a short tone on that
pair. Whichever mixer channel lights up is that deck’s channel.